Disclaimer

STEDMAN INTRODUCES
HYDRAULIC SHIM KITS
THAT HELP MAINTAIN
GAP SETTINGS

Aurora, IN -- Stedman's new hydraulic shim kits help maintain the desired gap settings on Stedman crushers, reducing costly downtime and maintenance and maximizing production. The hydraulic shim kits also eliminate wrench turning to raise or lower apron assembly.

Three-spool control valve actuates both the front and rear apron lift bridge weldment and hinged housing. The control is to be used with pump supplied with the Stedman crusher.

Front and rear apron lift bridge weldments with hydraulic shim kits, including a rear spring bridge assembly.

Everything needed to keep impactors crushing to size is included in the kits. Included are lift bridge weldments for both front and rear apron assemblies, hydraulic cylinders for both front and rear apron assemblies, 3-spool control valve to actuate housing cylinders or apron cylinders, and shims, counterbalance valves on both cylinders for added safety should one of the hydraulic lines fail, and all necessary hydraulic hoses and fittings.

Adding or removing the shims to maintain optimum size product production is easy. When apron gaps need adjusting due to wear, simply perform lockout/tagout procedures and raise the apron using the hydraulic cylinder on the lift bridge. Lift bridge is controlled by a 3-spool control valve mounted on the housing. Then unlock the shim fasteners, add or remove the needed shims to reach or maintain the needed gap setting, and lock shim fasteners. Lower the hydraulic cylinder and return to crushing.

Stedman is the originator of the cage mill and is a leading manufacturer of size reduction equipment for the aggregate, chemical, fertilizer, brick and clay, and recycling industries, among others. It offers a full range of high efficiency impactors, cage mills, hammer Mills, crushers, and lump-breakers and fine grinders for crushing, pulverizing, fine grinding, blending or de-lumping tough, wet and dry materials. Stedman markets their products worldwide and has installations throughout the world.

For more information or testing procedures contact Stedman, Sales Department, P.O. Box 299, 129 Franklin St., Aurora, IN 47001. Telephone: 800-262-5401 or 812-926-0038 or Fax 812-926-3482.

Click here for the PDF literature on Shim Kits.

Back to Stedman Press Room

Your solution to size reduction™
129 Franklin Street • PO Box 299 Aurora, IN 47001
Telephone:  (800) 262-5401 or (812) 926-0038
Fax: 812-926-3482 • sales@stedman-machine.com