Applications
Parts & Service
Literature Area

Impactors
Mega Slam Impactor
Grand Slam Impactor
V-Slam Impactor

Mills/Pulverizers
H-Series Cage Mill
F-Series Cage Mill
Y-Series Cage Mill
G-Series Cage Mill

Hammer Mills
A, B, BX Series

Lumpbreakers
Aurora Rotor

Fine Grinders
Micro-Max

Waste Recycler
Grand Slam
Waste Recycler

Reducers
Chain Mill

Stock Crushers
Reconditioned Crushers

Custom Designed
Systems

Disclaimer

“G” and “H” Series Cage Mills Applications

Corn Grinder and Soybean Meal Grinder for Animal Feed Supplement

Stedman G and H Series Cage Mills provide many advantages over hammer mills as a corn grinder and soybean meal grinder for animal feed supplement. One Stedman Cage Mill can replace 4 to 6 hammer mills, reducing electrical cost and floor space requirement.

The soybean meal grinder and corn grinder cage mill provides a fine, uniform grind with no close clearances to maintain. Product is more consistent. Cage Mills also provide more positive product control and generate fewer fines than hammer mills. Heat build-up is eliminated, ensuring no discoloration of material and allowing for lower grinding temperatures.

Designed with an open discharge area, the Cage Mills have no screens or grates to plug or break. Maintenance is fast and easy. The Cage Mills can be completely open and ready for inspection in about 5 minutes. A complete change out of cage and wear components can be done in less than an hour, reducing maintenance costs and downtime. And there are no screens to replace or unplug.

Field Proven*

• Crush whole kernel corn to a nominal minus 8 mesh
• Reduce corn fiber for animal feed supplement to the right fineness to produce a strong durable pellet that minimizes breakage during shipment
• Wet mills hulls to release bound starch. Average water content 70% to 75%, sulfur dioxide content 3% to 5% with a caustic Ph of 3.5% to 4%. (For this application 316 and 304L stainless steel is used.)
• Remove germ from high moisture content corn---35% to 40% moisture content
• Process corn fiber material to 95% to 98% to minus 4 mesh with 55 to 60% minus 16 mesh.
• Grind soybean meal to minus 8 x 80 mesh yield.

Key Benefits

• One cage mill replaces 4 to 6 hammer mills
• Cuts horsepower requirements in half, saving power costs
• Eliminates maintaining close clearances
• Compact design uses less floor space
• Eliminates replacing/unplugging screens, reduces downtime
• Increased positive product control
• No heat build-up. Grinding temperatures can be lowered.
• Less fines

Your solution to size reduction™
129 Franklin Street • Aurora, IN 47001
Telephone:  (800) 262-5401 or (812) 926-0038
Fax: 812-926-3482 • sales@stedman-machine.com